Challenge

Morgana Creasers

compact, reliable and easy to use creasing systems

AutoCreaser Pro 385

The Morgana AutoCreaser Pro 385 features dual creasing blades, a high capacity feeder for longer runs and can run up to 8,500 sheets per hour. The AutoCreaser Pro 385 provides the complete solution to the problem of cracking that occurs when folding digitally printed output and is equally effective in dealing with conventionally printed card, laminates or cross-grained stock.

The AutoCreaser Pro 385 is equipped with the very latest in technology to enable automatic set up of jobs, including setting of all feeder functions, by selecting a few simple parameters on the Morgana SmartScreen touch screen control panel. The deep pile feeder allows stacking of up to 17.72″ of paper to enable longer runs and is equipped with a SmartStep table drop for fast loading of shorter run jobs. Paper feeding is controlled by a new vacuum top feeding drum that can automatically change between a wide range of paper types and thickness with little operator intervention.

Another feature of the AutoCreaser Pro 385 is the dual blade and matrix system. This allows operator to select “up” and “down” crease profiles in one pass, particularly useful when producing covers for perfect binding, or to carry two different crease widths to quickly and easily change from heavy to lightweight stock, once again, by simple selection from the SmartScreen. And all Morgana crease and matrix sets are guaranteed for the life of the machine.

The AutoCreaser Pro 385 is controlled entirely by the latest version of the Morgana’s SmartScreen touchscreen control. The sheet size is entered, along with finish fold type and then all other functions are set automatically. For non-standard sheet sizes or fold types, an alpha-numeric memory allows an unlimited number of jobs to be stored and named as you choose, making job recall much easier using your own job name and numbers.

Up to 8,500 A4 sheets per hour can be produced with the crease position accurate to +/- 0.1mm, with a maximum sheet size of 15.16″ x 27.5″. Up to 16 creases per sheet can be placed as close as 1mm a part.

Perforation comes as standard on the AutoCreaser Pro range with a wide variety of wheels available to suit all. An optional side/stop perforating unit can be added for more complex jobs.

  • Crease without cracking
  • Intuitive SmartScreen touch screen control
  • Takes stock up to 0.015″ (approximately 150lb)
  • Maximum sheet size 15.16″ x 27.5″
  • Suction feed top feeder
  • 17.72″ deep pile feeder
  • SmartStep table drop
  • Up to 16 creases per sheet
  • Creasing blade and matrix guaranteed for life
  • Dual creasing blades
  • 8,500 sheets per hour
  • In-line perforating as standard

AutoCreaser Pro 50

Morgana is recognized as a leading innovator in the development of finishing systems. The AutoCreaser Pro series provides the complete solution to the problem of cracking that occurs when folding digitally printed output. This automatic creaser is capable of handling conventionally printed card, laminates or cross-grained stock. The Morgana AutoCreaser Pro series employs a unique creasing rule and matrix which eliminates tearing and cracking.

The Morgana AutoCreaser Pro 50 provides the complete solution to the problem of cracking that occurs when folding digitally printed output. It is equally effective in dealing with conventionally printed card, laminates or cross grained stock.

Creasing versus Scoring: Traditional rotary scoring machines use circular blades that are in constant motion as the stock passes through them. This creates a ploughing action that actually cuts through the top fibres of the paper or card in order to create a score. Inevitably this weakens the paper and encourages cracking. In contrast, the Morgana AutoCreaser Pro 50 employs a unique creasing rule and matrix that eliminates tearing and, therefore, cracking.

  • 7″ SmartScreen touch screen
  • 27.5″ x 19.6″ sheet size
  • Fully automatic, intuitive and easy to use
  • Up to 16 creases per sheet
  • Takes stock up to 0.015″ (approximately 150lb cover)
  • Rule and matrix guaranteed for life
  • 8,500 sheets per hour
  • Unlimited alpha numeric memory
  • Adjustable crease depth and squaring
  • Perforating as standard

AutoCreaser Pro 33

Morgana is recognized as a leading innovator in the development of finishing systems. The AutoCreaser Pro series provides the complete solution to the problem of cracking that occurs when folding digitally printed output. This automatic creaser is capable of handling conventionally printed card, laminates or cross-grained stock. The Morgana AutoCreaser Pro series employs a unique creasing rule and matrix which eliminates tearing and cracking.

The Morgana Autocreaser Pro 33 is an easy to use paper creasing machine for digital printers, which allows the user to cut, crease and fold by employing a unique creasing rule that eliminates paper tearing and therefore cracking. The Autocreaser Pro 33 is equally effective in dealing with conventionally printed card, laminates or cross-grained stock.

Creasing versus Scoring: Traditional rotary scoring machines use circular blades that are in constant motion as the stock passes through them. This creates a ploughing action that actually cuts through the top fibres of the paper or card in order to create a score. Inevitably this weakens the paper and encourages cracking. In contrast, the Morgana AutoCreaser Pro 33 employs a unique creasing rule and matrix that eliminates tearing and, therefore, cracking.

  • 7″ SmartScreen touch screen
  • 27.5″ x 12.9″ sheet size
  • Fully automatic, intuitive and easy to use
  • Up to 16 creases per sheet
  • Takes stock up to 0.015″ (approximately 150lb cover)
  • Rule and matrix guaranteed for life
  • 8,500 sheets per hour
  • Unlimited alpha numeric memory
  • Adjustable crease depth and squaring
  • Perforating as standard

DigiCreaser

The Morgana DigiCreaser fills the gap between our manual machines and fully automatic machines like the best selling AutoCreaser Pro range. While it’s cost is little over half that of an AutoCreaser, it offers exactly the same creasing quality and accuracy. This is because it uses an identical matrix and rule action, with the same technology to control both the positioning of the creases, but also to give a completely consistent creasing depth. With the rule and matrix manufactured from high quality tooled steel we can guarantee this mechanism for life.

The DigiCreaser is no slouch when it comes to productivity. All functions are fully automatic after feeding and the unit can operate at speeds up to 4,000 sheets per hour. Up to 9 creases can be achieved in one pass and the sophisticated controls enable jobs to be stored and retrieved for repeat work.

The class leading specification of the DigiCreaser includes a maximum sheet size of 24.8″ x 12.9″ and it will handle weights of stock up to 0.015″ (approximately 150lb cover) including laminated material.

The DigiCreaser has a head-up display for greater ease of use. This is particularly intuitive as it provides the operator with a series of prompts which are actioned by a single controller. These include positioning of the creases, setting the speed of the machine, storing jobs and counting facility.

  • Fast and easy to setup
  • Fully automatic after feeding
  • Bench top or floor standing design with small footprint
  • Takes stock up to 0.015″ (approximately 150lb cover)
  • Rule and matrix guaranteed for life
  • 4000 sheets per hour
  • Memory for storing repeat jobs
  • Adjustable crease depth and squaring
  • Perforating as standard

ElectroCreaser 36 and 52

The Morgana ElectroCreaser 52 (52cm width) and the ElectroCreaser 36 (36cm width) are compact table-top units that are fast to set up and simple to operate and are ideal for any smaller printer or in-plant.

The semi-automatic ElectroCreaser is the ideal unit for those who need something faster than a manual creaser, such as the Morgana DocuCrease but do not have the volume of work to justify a fully automated machine like the Morgana AutoCreaser.

Like other Morgana products, it employs a blade and matrix action which, unlike scoring, will not cause any damage to the substrate, and will produce a superb crease on stocks up to 0.015″ (approximately 150lb cover) including laminated material. It provides 2 creasing widths as standard, 0.04″ and 0.06″ with the ability to change from one to another in seconds. It also has a special “Super Speed” stop system, which greatly simplifies jobs that call for multiple creases.

The creasing matrix is electronically activated by a foot switch for increased accuracy and productivity.

  • 2 models available, 36cm or 52cm widths
  • Fast & easy to setup
  • Foot switch operation
  • Takes stock up to 0.015″ (approximately 150lb cover)
  • Rule and matrix guaranteed for life
  • Heavy duty tabletop design

DocuCreaser 36 and 52

The Morgana DocuCrease 52 (52cm width) and the DocuCrease 36 (36cm width) are compact hand operated table-top units that are fast to set up and simple to operate and are ideal for any smaller printer or in-plant.

Like the fully automated Morgana AutoCreaser, the DocuCrease has been designed to overcome the cracking problems encountered when trying to fold material from digital or litho based print engines.

The DocuCrease has two adjustable backstops for multiple creases on the same cover or for repeat jobs (additional backstops can be supplied). Fast, easy set-up with indicator scales showing the position of the creases.

The creasing matrix is manually activated by by hand and the creasing action is a process proven to eliminate cracking of the most difficult materials.

  • 2 models available, 36cm or 52cm widths
  • Fast & easy to setup
  • Left or right handed operation
  • Takes stock up to 0.015″ (approximately 150lb cover)
  • Rule and matrix guaranteed for life
  • Heavy duty tabletop design

Contact Us for More Information

Contact us today for more information on the Morgana Product Line.